EU tariff 85015100 Other AC motors, multi-phase
Import duty 0%
EU import result
85015100Electric motors and generators (excluding generating sets)Import duty0%of customs value · Regulation 1549/066 conditional charges may also apply · see Reporting & relief
Border controlsNonenone on this code
Other customs charges
Base customs duty
2.7%Reporting and relief rows on this code
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- However, the suspension is not allowed where the treatment is carried out by retail sale or catering undertakings.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 85015100
8501510010Of an output exceeding 735 W, for use in civil aircraft8501510020Of an output of less than 750 W, for use in certain types of aircraft8501510025Electric permanent magnet synchronous motor with:
-an output power of 550 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 32,5 mm and separated by an angle of 21,8°,
-a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard),
-a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental),
-a cogging torque of no more than 13 mNm,
-a friction torque in ambient temperature of no more than 22 mNm,
-a maximum temperature of motor operation of no more than 200 °C8501510030AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,With:
- an output of 340W or more but not more than 7,4kW,
- a flange of dimensions of not more than 180mm × 180mm, and
- a length from flange to extreme end of resolver of not more than 271mm8501510035Electric permanent magnet synchronous motor with:
-an output power of 600 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the diameter 59,2 mm and separated by an angle 30,0°,
-a housing made of electrogalvanized steel (per JIS G3313 Grade SECE standard) using a deep-drawing stamping process,
-a diameter of 88,600 mm or less but no less than 88,546 mm at the motor-system assembly interface,
-a back electromotive force constant (Ke) of 0,03277 V-sec/rad or more but no more than 0,03623 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,35 % (of fundamental) and 7th of no more than 0,30 % (of fundamental),
-a cogging torque of no more than 12 mNm,
-a friction torque in ambient temperature of no more than 23 mNm,
-a maximum temperature of motor operation of no more than 200 °C8501510040Electric AC motor, three-phase, with:
-a rated power of 280 W or more but not more than 320 W,
-an output power of 480 W or more but not more than 540 W,
-an input power of 800 W or more but not more than 900 W,
-an external diameter of 150 mm or more but not more than 170 mm,
-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,
-a weight of 6 kg or more but not more than 6,4 kg,
-a pulley and a tachometer,
for use in the manufacture of home appliance products8501510045Automotive-ready brushless permanently excited magnet synchronous alternating current motor with:
-a specified speed of not more than 7000 rpm,
-an output of 400 W or more but not more than 750 W (at 12 V),
-a flange diameter of 80 mm or more, but not more than 200 mm,
-a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end,
-a housing length of not more than 265 mm, measured from the flange to the outer end,
-a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface),
-a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets,
-whether or not with electronic power steering controller,
-whether or not with pulley or coupling,
-whether or not with rotor position sensor8501510050Three phase AC synchronous brushless permanent magnet motor with:
-an output of 500 W or more but not more than 700 W,
-an external diameter of 129,7 mm or more but not more than 180,3 mm,
-a rated speed of 16 000 rpm or more but not more than 17 000 rpm,
-a weight of 2,5 kg or more but not more than 3,1 kg, and
-with a pulley,
for use in the manufacture of home appliance products8501510090Other