EU tariff 8501510025 Electric permanent magnet synchronous motor with:
-an output power of 550 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 32,5 mm and separated by an angle of 21,8°,
-a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard),
-a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental),
-a cogging torque of no more than 13 mNm,
-a friction torque in ambient temperature of no more than 22 mNm,
-a maximum temperature of motor operation of no more than 200 °C
Import duty 2.7%
EU import result
8501510025Electric permanent magnet synchronous motor with:
-an output power of 550 W,
-a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover,
-an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm,
-terminals located across the radius 32,5 mm and separated by an angle of 21,8°,
-a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard),
-a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad,
-a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental),
-a cogging torque of no more than 13 mNm,
-a friction torque in ambient temperature of no more than 22 mNm,
-a maximum temperature of motor operation of no more than 200 °CImport duty2.7%of customs value · Regulation 2522/243 conditional charges may also apply · see Reporting & relief
Border controlsNonenone on this code
€2.70estimated duty · 2.7% of value
Rate 2.7% · TARIC:
2.700 %Reporting and relief rows on this code
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.