EU tariff 39211900 Of other plastics

Import duty 6.5% · 2 border controls

EU import result

EU import · third-country (MFN) rate · TARIC snapshot 2026-07-06

39211900Of other plastics
Import duty6.5%of customs value · Regulation 1789/035 conditional charges may also apply · see Reporting & relief
Border controls2see Border controls
€6.50estimated duty · 6.5% of value
Rate 6.5% · TARIC: 6.500 %

Selected from the EU TARIC snapshot 2026-07-06.

Declarable codes under 39211900

3921190010For use in certain types of aircraft3921190030Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers3921190050Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with - a total thickness of more than 0,05 mm but not more than 0,20 mm, - a water entry pressure between 5 and 200 kPa according to ISO 811, and - an air permeability of 0,08 cm$3/cm$2/s or more according to ISO 5636-53921190053Sheets of closed-cell silicone foam with:<br> <br>-a thickness of 2,0 mm or more but not more than 4,8 mm,<br> <br>-a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518)<br> <br>-a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149) <br>3921190055Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application3921190065Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm,3921190075Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm3921190095Film of polyethersulfone, of a thickness of not more than 200 µm3921190099Other