EU tariff 39206219 Other
Import duty 6.5%
EU import result
39206219Of poly(ethylene terephthalate)Import duty6.5%of customs value · Regulation 1789/033 conditional charges may also apply · see Reporting & relief
Border controlsNonenone on this code
€6.50estimated duty · 6.5% of value
Rate 6.5% · TARIC:
6.500 %Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Supplementary unit
MTK- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Customs measure
0%Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 39206219
3920621905Poly(ethylene terephthalate) film in rolls:
- with a thickness of 0,335 mm or more but not more than 0,365 mm, and
- coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm3920621908Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either:
- only dyed in the mass, or
- dyed in the mass and metallised on one side3920621928Non-transparent poly(ethylene terephthalate) film:
-each outer layer with a thickness of 7 nm or more but not more than 80 nm,
-with a tensile strength of 300 N/cm or more (ASTM D-882),
-with a total thickness of 200 µm or more but not more than 350 µm, and
-with a width of 600 mm or more but not more than 1 600 mm
- covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites3920621932Transparent poly(ethylene terephthalate) film:
-having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not,
-with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin,
-with a light transmittance of more than 70 %,
-with a haze value of not more than 1,3 %,
-with a total thickness of 10 µm or more but not more than 350 µm,
-with a width of 800 mm or more but not more than 1 600 mm3920621938Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm3920621948Sheets or rolls of poly(ethylene terephthalate):
- coated on both sides with a layer of epoxy acrylic resin,
- of a total thickness of 37 μm (± 3 μm)3920621952Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257 method)3920621960Poly (ethylene terephtalate) film:
- of a thickness of not more than 20 µm,
- coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm3920621970Poly(ethylene terephthalate) film in rolls with:<br> <br>-a thickness of 35 μm or more, but not more than 75 μm,<br> <br>-a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD),<br> <br>-an elongation at break of 400 % or more in MD and 30 % or more in TD,<br> <br>-a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %,<br> <br>-a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points,<br> <br>-a light transmittance of 85 % or more,<br> <br>-a haze ratio of not more than 6 %,<br> <br>-a surface tension of 38 mN/m or more,<br> <br>-a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³,<br> <br>-a shelf life declared by the manufacturer of not less than 12 months<br>3920621979Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with
-a thickness of 0.07 mm or more but not more than 0.15 mm
-a width of 762 mm or more but not more than 1350 mm3920621985Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with:
-a total thickness of 300 µm or more, but not more than 330 µm,
-a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882),
-a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes,
-a low water vapor permeability of 2,5 g/m²•d or less, and
-a high breakdown voltage of 18 kV or more and
-a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009)
to be used as a protective layer on the back of photovoltaic modules3920621999Other