EU tariff 39191080 Other
Import duty 6.5% · 1 border control
EU import result
39191080In rolls of a width not exceeding 20|cmImport duty6.5%of customs value · Regulation 0948/094 conditional charges may also apply · see Reporting & relief
Border controls1see Border controls
€6.50estimated duty · 6.5% of value
Rate 6.5% · TARIC:
6.500 %Border controls
Refrigerant gases (F-gas)
- Refrigerant gases, the kind in fridges, air conditioning and heat pumps. It only matters if your product contains or runs on them, which most don't.
- By virtue of Article 4(6) of Regulation (EU) 2024/573, the placing on the market of fluorinated greenhouse gases shall be prohibited, unless importers provide evidence that any trifluoromethane, produced as a by-product during the production process of the fluorinated greenhouse gases has been destroyed or recovered for subsequent use, using best available techniques. By virtue of Article 11.1. of Regulation (EU) 2024/573, the placing on the market of products and equipment, including parts thereof, listed in Annex IV, with an exemption for military equipment, shall be prohibited from the date specified in that Annex. By virtue of Article 11.1 sub paragraph 2 (a)(b), (c) of Regulation (I) 2024/573, the placing on the market of parts of products and equipment required for repair and servicing of existing equipment listed in Annex IV shall be allowed. By virtue of Article 11.3. of Regulation (EU) 2024/573, the placing on the market of non-refillable containers for fluorinated greenhouse gases listed in Annex I and in Section 1 of Annex II, empty, or fully or partially filled, shall be prohibited. By virtue of Article 11.4 of Regulation (EU) 2024/573, undertakings which place on the market refillable containers for fluorinated greenhouse gases shall produce a declaration of conformity that includes evidence confirming that there are binding arrangements in place for the return of those containers for the purpose of refilling, in particular identifying the relevant actors, their obligatory commitments and the relevant logistical arrangements. By virtue of Article 12 of Regulation (EU) 2024/573, the following products and equipment that contain fluorinated greenhouse gases or whose functioning relies upon those gases shall only be placed on the market if they are labelled as: (a) refrigeration equipment ; (b) air-conditioning equipment ; (c) heat pumps ; (d) fire protection equipment ; (e) electrical switchgear ; (f) aerosol dispenser that contain fluorinated greenhouse gases, including metered dose inhalers; (g) all fluorinated greenhouse gas containers ; (h) fluorinated greenhouse gas-based solvents ; or (i) organic Rankine cycles. By virtue of Article 16 of Regulation (EU) 2024/573, the placing on the market of hydrofluorocarbons shall be allowed only to the extent that importers have been allocated quota by the Commission as set out in Article 17. By virtue of Article 19.1 of Regulation (EU) 2024/573, refrigeration and air-conditioning equipment, heat pumps and metered dose inhalers pre-charged with substances listed in Section 1 of Annex I shall not be placed on the market unless those substances with which the products or equipment have been pre-charged are accounted for within the quota system. By virtue of Article 19.2 of Regulation (EU) 2024/573, the placing on the market of goods falling under the provisions of Article 19.1 shall be subject to the presentation of a declaration of conformity. By virtue of Article 19.6 of Regulation (EU) 2024/573, undertakings that placed on the market less than 10 tonnes of CO2 equivalent of hydrofluorocarbons, per year, contained in the products or equipment referred to in Article 19.1 shall be exempted from the provisions of Article 19. By virtue of Article 20.4 of Regulation (EU) 2024/573, the undertakings shall have a valid registration in the F-gas Portal prior to carrying out any of the activities listed in points (a) to (g). By virtue of Article 23.3 (a) of Regulation (EU) 2024/573, the F-gas Portal registration identification number shall be declared. The information listed in Article 23.3(a) to (d) of Regulation (EU) 2024/573 shall be provided to customs authorities, where relevant, in the customs declaration.
Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 39191080
3919108010For use in certain types of aircraft3919108025Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film3919108027Polyester film:
- coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and
- on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner3919108035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film3919108045Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm3919108055Acrylic foam tape:
- covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive,
- covered on the other side with an acrylic pressure sensitive adhesive,
- covered on one or both sides with a release sheet,
- with a peel adhesion of more than 25 N/cm (at an angle of 90° as determined by the ASTM D 3330 method)3919108057Reflecting sheet:
- of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern
- covered on one or both sides with one or more layers of plastic or metallisation, and
- whether or not covered on one side with a self-adhesive layer and a release sheet3919108063Reflecting film consisting of
- a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,
- a layer of an acrylic resin having embedded glass beads,
- a layer of an acrylic resin hardened by a melamine cross-linking agent,
- a metal layer,
- an acrylic adhesive, and
- a release film3919108073Self-adhesive reflecting sheet whether or not in segmented pieces,
- whether or not containing a watermark,
- with or without an application tape coated on one side with an adhesive;
the reflective sheet consists of:
- a layer of acrylic or vinyl polymer,
- a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,
- a layer of metallisation,
- an adhesive layer, and
- a release sheet
- whether or not containing an additional layer of polyester3919108075Self adhesive reflecting film, consisting of several layers including:
- a copolymer of acrylic resin,
- polyurethane, - a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,
- glass microspheres, and
- an adhesive layer, with a release liner on one or both sides3919108078Polytetrafluoroethylene film,
-with a thickness of 50 µm or more,
-with a width of 6,30 mm or more but not more than 740 mm,
-an elongation at break of not more than 200 %, and
-coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 µm3919108090Other