EU tariff 87089997 Other

Import duty 3.5% · 3 border controls

EU import result

EU import · third-country (MFN) rate · TARIC snapshot 2026-07-06

87089997Parts and accessories of the motor vehicles of headings|8701|to 8705
Import duty3.5%of customs value · Regulation 1549/063 conditional charges may also apply · see Reporting & relief
Border controls3see Border controls
€3.50estimated duty · 3.5% of value
Rate 3.5% · TARIC: 3.500 %

Other customs charges

Tariff preference0%
Conditional: applies only in the cases the measure text sets out
  • The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
  • The tariff quota does not apply to any mixtures, preparations or products made up of different components containing products which are listed in the Annex to Council Regulation (EU) 2021/2283.

Selected from the EU TARIC snapshot 2026-07-06.

Declarable codes under 87089997

8708999722Silicone or plastic keyboards, comprising:<br> <br>-parts of common metal, and<br> <br>-whether or not comprising parts of plastic,<br> <br>-epoxy resin reinforced with fiberglass or wood,<br> <br>-whether or not printed or surface-treated,<br> <br>-with or without electrical conductors,<br> <br>-with or without a membrane bonded to the keyboard,<br> <br>-with or without mono or multilayer protective film<br>8708999727Inner pole electromagnet core used in Magneto-Rheological engine mounts to reduce shocks and for isolation and damping in passenger cars:<br> <br>-of a powder metal assembly,<br> <br>-with a diameter of not more than 90,95 mm,<br> <br>-with an overall height of 24,5 mm,<br> <br>-impregnated with sealant,<br> <br>-zinc plated<br>8708999743Outer tie rod with a housing made of AISI 4137 (SCM435) steel or EN10083/2- C45R N steel or JIS G4053-SCM435 low alloy steel, with: -a ball stud made of EN 10263/4 - 41CrS4 Q T steel or AISI 4137 (SCM435) steel or EN10083/3-42CrMoS4Q T steel or JIS G4053-SCM435 low alloy steel, -a polyoxymethylene plastic ball seat, -a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm, -a ball stud diameter of 21,98 mm or more but no more than 22 mm, -a threaded hole depth of 40,5 mm or more but no more than 52 mm with dimensions M14x1,5, -a boot seal, -a boot seal protector and retaining ring, -lubricant, for use in the manufacture of vehicle's steering system8708999750Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles8708999753Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the suspension components: -made of aluminum, rubber, and plastic, -with a height of 270 mm or more, but not more than 300 mm, -with a width of 50 mm or more, but not more than 65 mm, -with a length of 150 mm or more, but not more than 170 mm, for use in the manufacture of motor vehicles8708999758Mounting bracket of front radiator or intercooler: -made of iron or steel or of plastics, -whether or not with rubber cushioning, for use in the manufacture of goods of heading 87088708999775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 878708999780Specific pre-assembled or ready-to assemble sections for new mobile cranes8708999790Other