EU tariff 87085099 Other
Import duty 3.5% · 2 border controls
EU import result
87085099Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereofImport duty3.5%of customs value · Regulation 1549/062 conditional charges may also apply · see Reporting & relief
Border controls2see Border controls
€3.50estimated duty · 3.5% of value
Rate 3.5% · TARIC:
3.500 %Border controls
Ozone-depleting substances
- Older refrigerant and aerosol chemicals that harm the ozone layer. Banned, or allowed only with a licence.
- The placing on the market and import of ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall be prohibited. (Articles 4 and 5 of regulation (EU) 2024/590) By virtue of Article 13 of Regulation (EU) 2024/590, the following imports are allowed: (a) ozone-depleting substances to be used as feedstock in accordance with Article 6; (b) ozone-depleting substances to be used as process agents in accordance with Article 7; (c) ozone-depleting substances to be used for essential laboratory and analytical uses in accordance with Article 8; (d) ozone-depleting substances for destruction by technology as referred to in Article 20(6); (e) ozone-depleting substances for reclamation as referred to in Article 12; (f) methyl bromide for emergency use in accordance with Article 10; (g) recovered, recycled or reclaimed halons, under the condition that they are only imported for critical uses referred to in Article 9(1), by undertakings authorised by the competent authority of the Member State concerned to store halons for critical uses; (h) products and equipment containing halons or whose functioning relies upon halons, for the purposes of critical uses referred to in Article 9(1); (i) products and equipment containing ozone-depleting substances, or whose functioning relies upon those substances, for destruction, where applicable by technology as referred to in Article 20(6); (j) products and equipment containing ozone-depleting substances or whose functioning relies upon those substances, for the purposes of essential laboratory and analytical uses as referred to in Article 8. The imports falling under the above exemptions shall be subject to the presentation of a valid licence to customs authorities issued by the Commission pursuant to Article 16. According to article 15.1 of Regulation (EU) 2024/590, import of non-refillable containers for ozone-depleting substances, empty, or fully or partially filled, shall be prohibited, except for essential laboratory and analytical uses as referred to in Article 8. Undertakings which place on the market refillable containers for ozone-depleting substances shall produce a declaration of conformity that includes evidence confirming that there are binding arrangements in place for the return of those containers for the purpose of refilling. (Article 15.3 subparagraph (1) of Regulation (EU) 2024/590).
- Each importer, undertaking or operator that imports ozone-depleting substances, products and equipment containing ozone-depleting substances listed in Annex I or whose functioning relies upon those substances shall provide to customs authorities the licensing system registration identification number and the number of the licence pursuant to Article 13(2) and Article 14(3).
- By virtue of Article 17.3 (c) and (d), when importing goods, the following information shall be declared: - net mass of ozone-depleting substance(s), also when included in products and equipment. - net mass multiplied by the ODP of the ozone-depleting substance(s), also when included in products and equipment.
Refrigerant gases (F-gas)
- Refrigerant gases, the kind in fridges, air conditioning and heat pumps. It only matters if your product contains or runs on them, which most don't.
- By virtue of Article 4(6) of Regulation (EU) 2024/573, the placing on the market of fluorinated greenhouse gases shall be prohibited, unless importers provide evidence that any trifluoromethane, produced as a by-product during the production process of the fluorinated greenhouse gases has been destroyed or recovered for subsequent use, using best available techniques. By virtue of Article 11.1. of Regulation (EU) 2024/573, the placing on the market of products and equipment, including parts thereof, listed in Annex IV, with an exemption for military equipment, shall be prohibited from the date specified in that Annex. By virtue of Article 11.1 sub paragraph 2 (a)(b), (c) of Regulation (I) 2024/573, the placing on the market of parts of products and equipment required for repair and servicing of existing equipment listed in Annex IV shall be allowed. By virtue of Article 11.3. of Regulation (EU) 2024/573, the placing on the market of non-refillable containers for fluorinated greenhouse gases listed in Annex I and in Section 1 of Annex II, empty, or fully or partially filled, shall be prohibited. By virtue of Article 11.4 of Regulation (EU) 2024/573, undertakings which place on the market refillable containers for fluorinated greenhouse gases shall produce a declaration of conformity that includes evidence confirming that there are binding arrangements in place for the return of those containers for the purpose of refilling, in particular identifying the relevant actors, their obligatory commitments and the relevant logistical arrangements. By virtue of Article 12 of Regulation (EU) 2024/573, the following products and equipment that contain fluorinated greenhouse gases or whose functioning relies upon those gases shall only be placed on the market if they are labelled as: (a) refrigeration equipment ; (b) air-conditioning equipment ; (c) heat pumps ; (d) fire protection equipment ; (e) electrical switchgear ; (f) aerosol dispenser that contain fluorinated greenhouse gases, including metered dose inhalers; (g) all fluorinated greenhouse gas containers ; (h) fluorinated greenhouse gas-based solvents ; or (i) organic Rankine cycles. By virtue of Article 16 of Regulation (EU) 2024/573, the placing on the market of hydrofluorocarbons shall be allowed only to the extent that importers have been allocated quota by the Commission as set out in Article 17. By virtue of Article 19.1 of Regulation (EU) 2024/573, refrigeration and air-conditioning equipment, heat pumps and metered dose inhalers pre-charged with substances listed in Section 1 of Annex I shall not be placed on the market unless those substances with which the products or equipment have been pre-charged are accounted for within the quota system. By virtue of Article 19.2 of Regulation (EU) 2024/573, the placing on the market of goods falling under the provisions of Article 19.1 shall be subject to the presentation of a declaration of conformity. By virtue of Article 19.6 of Regulation (EU) 2024/573, undertakings that placed on the market less than 10 tonnes of CO2 equivalent of hydrofluorocarbons, per year, contained in the products or equipment referred to in Article 19.1 shall be exempted from the provisions of Article 19. By virtue of Article 20.4 of Regulation (EU) 2024/573, the undertakings shall have a valid registration in the F-gas Portal prior to carrying out any of the activities listed in points (a) to (g). By virtue of Article 23.3 (a) of Regulation (EU) 2024/573, the F-gas Portal registration identification number shall be declared. The information listed in Article 23.3(a) to (d) of Regulation (EU) 2024/573 shall be provided to customs authorities, where relevant, in the customs declaration.
Reporting and relief rows on this code
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Trade-defence monitoring
row present, no duty amount
- The EU is tracking imports of this product for a trade-defence case. Nothing to pay; you declare a TARIC additional code so customs can count the volumes.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 87085099
8708509910Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle
- of a length of 1 m or more but not more than 2 m,
- of a weight of 6 kg or more but not more than 9 kg8708509925Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:
-an outer diameter of 67,0 mm or more but not more than 84,5 mm,
-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,
- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,
-spline with 21 teeth or more but not more than 35,
-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves8708509935Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:
- an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,
- an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,
- a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and
- with a grease compartment,
- capable of working at constant speed at variable articulation angle not higher than 52 degrees8708509940Double flange bearing of 3rd generation, for motor vehicles,
- with double-row ball bearing,
- whether or not with impulse (encoder) ring,
- whether or not with antilock brake system (ABS) sensor,
- whether or not with mounted screws,
for use in the manufacture of goods of chapter 878708509945Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:
-6 ball tracks or more but not more than 8, with
-a thread,
-an external involute spline with 21 or more but not more than 38 teeth,
-for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,
-forged, turned, milled and hardened8708509950Inboard constant velocity joint tripod housing, with:
-an outer diameter of 67,0 mm or more but not more than 99,0 mm,
-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,
-an external spline with 21 teeth or more but not more than 41,
-forged, turned, rolled and hardened8708509960Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:
-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,
-forged, turned, broached and hardened8708509970Specific pre-assembled or ready-to assemble sections for new mobile cranes8708509990Other