EU tariff 85122000 Other lighting or visual signalling equipment

Import duty 2.7%

EU import result

EU import · third-country (MFN) rate · TARIC snapshot 2026-07-06

85122000Electrical lighting or signalling equipment (excluding articles of heading|8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles
Import duty2.7%of customs value · Regulation 1549/064 conditional charges may also apply · see Reporting & relief
Border controlsNonenone on this code
€2.70estimated duty · 2.7% of value
Rate 2.7% · TARIC: 2.700 %

Selected from the EU TARIC snapshot 2026-07-06.

Declarable codes under 85122000

8512200025An electrical component with an integrated LED, in an ABS housing, with: -a voltage of 11 V or more, but not more than 15 V, -a circular shape, -2 terminals, -an outer diameter of the housing of 36 mm or more, but not more than 42,5 mm, -a diode voltage of 42 V or more, but not more than 48 V and  -a current of 55 mA or more, but not more than 65 mA8512200035Sub-assembly reflectors and components for car rear lights: -containing two or three PCBA with a connection socket and LED, -with central control module (CCE) connected through wired harness, -with a main reflector, a sub-reflector and inner lens scattering the light made of plastic, -with depth of 119 mm or more, but not more than 146 mm, -with width of 142 mm or more, but not more than 490 mm, -with a height of 93 mm or more, but not more than 100 mm, -a weight of 414 g or more, but not more than 578 g, -with lightguide8512200060Information screen displaying: -at least time, date and status of safety features in a vehicle, or -safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit,  with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 878512200070Electrical component with light guide integrated with LED, for motor vehicles with: -two parallel ribs in the front area with a distance between them of 1,4 mm or more but not more than 1,8 mm,  -four holes with the dimension of 7,3 mm or more but not more than 7,9 mm in the short direction of the guide, and -a 3 pines connector, for use in the manufacture of automotive components8512200080Grab handle light with integrated LED, for motor vehicles:  -a distance between integrated spring clip and surface of 0,85 mm or more but not more than 1,85 mm,  -a length of the housing to two front vertical ribs of 26,45 mm or more but not more than 26,75 mm, and -four horizontal ribs where the distance on the lower area over the base radia between the two is 18,5 mm or more but not more than 18,7 mm,  for use in the manufacture of automotive components8512200090Other