EU tariff 85051110 Containing neodymium, praseodymium, dysprosium or samarium
Import duty 2.2% · 1 border control
EU import result
85051110Containing neodymium, praseodymium, dysprosium or samariumImport duty2.2%of customs value · Regulation 2261/984 conditional charges may also apply · see Reporting & relief
Border controls1see Border controls
€2.20estimated duty · 2.2% of value
Rate 2.2% · TARIC:
2.200 %Other customs charges
Tariff preference
0%- The tariff quota does not apply to any mixtures, preparations or products made up of different components containing products which are listed in the Annex to Council Regulation (EU) 2021/2283.
Border controls
Import check
- A general checkpoint. Customs wants a document before the goods are released, and the code's other footnotes say which one.
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 0B001j from the dual use list.
Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 85051110
8505111010For use in certain types of aircraft8505111020Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,
-whether or not arched,
-whether or not with rounded corners or oblique sides,
-whether or not colour marked
-whether or not coated or passivated with a surface treatment,
-whether or not consisting of segments bonded together and electrically insulated from one another
with:
-a length of 9 mm or more, but not more than 105 mm,
-a width of 5 mm or more, but not more than 105 mm,
-a thickness of 2 mm or more, but not more than 55 mm
intended to become permanent magnet after magnetisation8505111023Bars in the form of arched rectangles, containing alloy containing neodymium, with:
-a length of 15 mm or more but not more than 52 mm,
-a width of 5 mm or more but not more than 42 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation8505111028Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:
-with an external diameter of not more than 45 mm,
-with a height of not more than 45 mm,
-whether or not coated or passivated with a surface treatment,
intended to become permanent magnets after magnetisation8505111030Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:
-a rectangular or a trapezoidal cross-section,
-a length of not more than 140 mm,
-a width of not more than 90 mm and
-a thickness of not more than 55 mm,
or in the shape of an arched rectangle with:
-a length of not more than 75 mm,
-a width of not more than 40 mm,
-a thickness of not more than 7 mm and
-a radius of curvature of more than 86 mm but not more than 241 mm,
-layers of nickel and copper
or in the shape of a disc with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre8505111035Article of an alloy of neodymium, in the shape of a disc, with:
-a diameter of not more than 90 mm,
-whether or not a hole in the centre,
-layers of copper, nickel and/or zinc,
intended to become permanent magnets after magnetisation8505111074Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,
- whether or not overmolded with polymers,
- whether or not coated or passivated with a surface treatment,
with:
- a length of 5 mm or more, but not more than 60 mm,
- a width of 5 mm or more, but not more than 40 mm,
- a thickness of 3 mm or more, but not more than 15 mm,
intended to become permanent magnets after magnetisation8505111075A quarter sleeve intended to become permanent magnet after magnetization,
- consisting of at least neodymium, iron and boron,
- with a width of 9,1 mm or more but not more than 10,5 mm,
- with a length of 20 mm or more but not more than 30,1 mm,
of a kind used on rotors for the manufacture of fuel pumps8505111076Articles of an alloy of neodymium, or an alloy of samarium,
- whether or not coated or passivated with a surface treatment,
- whether or not covered with zinc,
- in the shape of rectangles,
with:
- a length of 13,8 mm or more but not more than 45,2 mm,
- a width of 7,8 mm or more but not more than 25,2 mm,
- a height of 1,3 mm or more but not more than 4,7 mm,
intended to become permanent magnets after magnetisation8505111077Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with:
- a width of 9,1 mm or more but not more than 10,5 mm,
- a length of 20 mm or more but not more than 30,1 mm,
intended to become permanent magnets after magnetization8505111078Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:
-a length of 200 mm or more but not more than 205 mm,
-a width of 58 mm or more but not more than 62 mm,
-a height of 25 mm or more but not more than 30 mm,
with a stud mounted in the middle8505111099Other