EU tariff 850300 Parts suitable for use solely or principally with the machines of heading|8501|or 8502
Import duty 2.7% · 1 border control
EU import result
850300Parts suitable for use solely or principally with the machines of heading|8501|or 8502Import duty2.7%of customs value · Regulation 2261/984 conditional charges may also apply · see Reporting & relief
Border controls1see Border controls
€2.70estimated duty · 2.7% of value
Rate 2.7% · TARIC:
2.700 %Border controls
Import check
- A general checkpoint. Customs wants a document before the goods are released, and the code's other footnotes say which one.
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 0B001b from the dual use list.
Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Customs measure
0%Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 850300
8503001010For use in certain types of aircraft8503001090Other8503002010For use in certain types of aircraft8503002020Plated steel core of the electric motor rotor of electric air conditioning compressors for motor vehicles: <br> <br>-with an outer diameter of 65 mm or more but not more than 80 mm, <br> <br>-with an inner diameter of 15 mm or more but not more than 25 mm, <br> <br>-with a height of 30 mm or more but not more than 45 mm, <br> <br>-with a weight of 0,5 kg or more but not more than 0,8 kg,<br> <br>-without windings<br>8503002030Plated steel core of the electric motor stator of electric air conditioning compressors for motor vehicles: <br> <br>-with an outer diameter of 90 mm or more but not more than 120 mm,<br> <br>-with an inner diameter of 65 mm or more but not more than 80 mm, <br> <br>-with a height of 30 mm or more but not more than 45 mm, <br> <br>-with a weight of 0,7 kg or more but not more than 1,2 kg,<br> <br>-without windings<br>8503002090Other8503009110For use in certain types of aircraft8503009131Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing8503009199Other8503009810For use in certain types of aircraft8503009832Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing8503009833Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm8503009837Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or sintered neodymium or plastoneodymium, with or without metal shaft and with or without plastic elements:
- diameter of the rotor body of 15mm or more but not more than 37mm,
- length of the rotor body of 12mm or more but not more than 36mm8503009840Pressure casted inner housing of a cooling channel system for an electrical motor:
-of EN AC-47100 aluminum,
-shot-blasted and machined,
-leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
-with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506),
-with a tensile strength of 190 N/mm² or more,
-with a height of 160 mm or more, but not more than 330 mm,
-with a diameter of 240 mm or more, but not more than 368 mm,
-with a weight of 3 kg or more, but not more than 5,84 kg8503009843Silicone or plastic keyboards, comprising:<br> <br>-parts of common metal, and<br> <br>-whether or not comprising parts of plastic,<br> <br>-epoxy resin reinforced with fiberglass or wood,<br> <br>-whether or not printed or surface-treated,<br> <br>-with or without electrical conductors,<br> <br>-with or without a membrane bonded to the keyboard,<br> <br>-with or without mono or multilayer protective film<br>8503009845Armature for the electric motor in starter motors of passenger cars and commercial vehicles with:<br> <br>-an outer diameter of 52 mm or more but not more than 80 mm,<br> <br>-a commutator copper wire diameter of 2 mm or more but not more than 4 mm<br>8503009853Pressure casted rotor cover of the cooling channel system in the electrical motor:
- of EN AC-47100-F aluminum,
- with a sealing cap of stainless steel,
- shot-blasted and machined,
- leakproof to the degree of 1ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),
- with a tensile strength of 190 N/mm² or more,
- with a height of 42mm or more, but not more than 64mm,
- with a diameter of 88mm or more, but not more than 132mm,
- with a weight of 0,3kg or more, but not more than 0,5kg8503009855Stator for brushless motor, with:
-an internal diameter of 206,6 mm (± 0,5)
-an external diameter of 265,0 mm (± 0,2) and
-a width of 37,2 mm or more but not more than 47,8 mm
of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums8503009863Pressure casted outer housing of an electrical motor:
- of EN AC-47100 aluminum,
- with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,
- shot-blasted and machined,
- with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,
- with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506),
- with a tensile strength of 190 N/mm² or more,
- with a height of 195mm or more, but not more than 430mm,
- with a width of 290mm or more, but not more than 625mm,
- with a length of 270mm or more, but not more than 535mm,
- with a weight of 5,2kg or more, but not more than 12,5kg8503009873Pressure die-cast electric motor stator housing:
-of EN AC-46000 aluminium,
-shot-blasted and machined,
-with a height of 70 mm or more but not more than 76 mm,
-with a width of 155 mm or more but not more than 162 mm,
-with a weight of 330 g or more but not more than 360 g8503009875Stator body of stacked electrical sheet having:
-an inner diameter of 18 mm or more, but not more than 35 mm,
-an outer diameter of 35 mm or more, but not more than 65 mm, and
-a length of 20 mm or more, but not more than 65 mm
-whether or not incorporated in a housing8503009899Other