EU tariff 85013100 Other DC motors; DC generators, other than photovoltaic generators
Import duty 0%
EU import result
85013100Electric motors and generators (excluding generating sets)Import duty0%of customs value · Regulation 1549/069 conditional charges may also apply · see Reporting & relief
Border controlsNonenone on this code
Other customs charges
Base customs duty
2.7%Tariff preference
0%- The tariff quota does not apply to any mixtures, preparations or products made up of different components containing products which are listed in the Annex to Council Regulation (EU) 2021/2283.
Reporting and relief rows on this code
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- For the construction, maintenance and repair of aircraft of an unladen weight exceeding 2 000 kilograms and of ground flying trainers for civil use.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Declare weight or units
Conditional — depends on a certificate or priceConditional: applies only in the cases the measure text sets out
- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- However, the suspension is not allowed where the treatment is carried out by retail sale or catering undertakings.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Customs measure
Conditional — depends on a certificate or priceConditional: applies only in the cases the measure text sets out
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Customs measure
Conditional — depends on a certificate or priceConditional: applies only in the cases the measure text sets out
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Customs measure
Customs measure
Reported per itemNot applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 85013100
8501310010Motors of an output exceeding 735 W, DC generators, for use in civil aircraft8501310020For use in certain types of aircraft8501310045DC motors, brushless, with:
- an external diameter of 90 mm or more, but not more than 110 mm,
- a rated speed of not more than 3 680 rpm,
- an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C,
- a supply voltage of 12 V,
- a torque of not more than 5,67 Nm,
- a rotor position sensor,
- an electronic star-point relay, and
- for use with an electric power steering control module8501310047Motor for automotive electric seat adjustment applications:
-with a shaft output on both motor sides,
-consisting of a permanently excited DC motor,
-whether brushed or brushless,
-whether or not with electronic control unit,
-whether or not with Hall Effect Sensor,
-with a nominal voltage of 8 V or more but not more than 16 V,
-with a rated output mechanical power not exceeding 120 W, and
-with a specified temperature range from -40 °C to 160 °C,
for use in the manufacture of automotive components for car's seats8501310048Brushless DC electric motors:
-with a rated power of 240 W or more, but not more than 260 W,
-with a voltage of 36 V or higher, but not higher than 52 V
-with a torque of 20 Nm or more, but not more than 140 Nm,
-with a housing made of aluminum, aluminum alloy or plastic,
-with or without a built-in controller,
-with a communication function in the LIN or UART interface,
-weighing 1,5 kg or more, but not more than 5,0 kg,
-adapted for mounting in a bicycle frame
for use in the manufacture of e-bikes8501310049Brushless DC electric motors:
- with a rated power of 240 W or more, but not more than 260 W,
- with a voltage of 24 V or higher, but not higher than 52 V,
- with a torque of 30 Nm or more, but not more than 62 Nm,
- with a LIN, UART or CAN communication interface,
- with an internal planetary gearbox with fixed or variable ratio or direct drive,
- with a housing made of aluminum or aluminium alloy,
- with a weight of 1,5kg or more, but not more than 6kg,
- adapted for mounting in the front or rear bicycle wheel,
for use in the manufacture of e-bikes8501310050DC motors, brushless, with: - an external diameter of 80 mm or more, but not more than 200 mm,
- a supply voltage of 4 V or more, but not more than 16 V,
- an output at 20 °C of 200 W or more, but not more than 750 W,
- a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,
- a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,
- with or without a pulley,
- with or without an electronic power steering sensor/controller8501310052Electric brushless direct current motor finished with biocompatible materials such as stainless steel according to specification 17-4 PH or type 303, 316L, 400 with:
-a three-phase winding,
-an output power not exceeding 280 W,
-a length with gearhead of 116,1 mm or more but not more than 117,2 mm,
-an external diameter of 13,86 mm or more but no more than 13,92 mm,
-a maximum torque of motor with gearhead 246,6 mNm in 25℃,
-a no-load radial speed of motor with gearhead with 9 900 rpm, at 24V in 25°C,
-a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140°C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure,
-14 functional pins for power and control purpose,
-a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector
for use in the manufacture of medical devices with right-left rotation and oscillation function8501310054Brushless DC electric motor, with:
-a rated voltage of 310 V,
-a rated power of 350 W or more but not more than 368 W,
-an input power of 500 W or more but not more than 550 W,
-output power of 350 W or more but not more than 400 W,
-an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm,
-a rated speed of 16300 rpm or more but not more than 16500 rpm,
-a weight of 2,33 kg or more but not more than 2,40 kg,
-a pulley8501310055DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:
-an external diameter of 24,2 mm or more, but not more than 140 mm,
-a rated speed of 3300 rpm or more, but not more than 26200 rpm,
-a rated supply voltage of 3,6 V or more, but not more than 230 V,
-an output power of more than 37,5 W , but not more than 2400 W,
-a free load current of not more than 20,1 A,
-a maximum efficiency of 50 % or more,8501310056DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power Pack with:
-a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure,
-a CAN-communication interface,
-an external sensor interface,
-operating temperature range of -40℃ to 95℃ or broader,
-compliance with standard IP6K9K for water and dustproofness,
-supply voltage of 9 V or more, but not more than 16 V,
-rated power output of 500 W or more, but not higher than 750 W,
-rated torque of 3 Nm or more, but not more than 6 Nm,
-length of 150 mm or more, but not more than 250 mm,
-width of 100 mm or more, but not more than 150 mm,
-height of 80 mm or more, but not more than 120 mm8501310057Brushless DC electric motor with LCD control indicator and/or control unit with buttons:
-with an output power of 200 W or more, but not more than 700 W,
-with a supply voltage of 30 V or more, but not more than 60 V,
-with a torque of 30 Nm or more, but not more than 200 Nm,
-with a height of 117 mm or more, but not more than 146 mm,
-with a length of 117 mm or more, but not more than 223 mm,
-with a width of 135 mm or more, but not more than 190 mm,
-with a weight of 2 kg or more but not more than 5 kg,
-designed to be mounted in a frame, front or rear bicycle wheel,
-equipped with sockets, at least for cable connection with LCD control indicator,
for use in the manufacture of electric bicycles8501310058Permanently excited DC motor with:
-an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,
-a rated speed of not more than 25 000 rpm,
-an output of 45 W or more but not more than 400 W, and
-a supply voltage of 9 V or more but not more than 50 V,
-whether or not a multiple-phase winding,
-whether or not with a drive disc,
-whether or not with a crankcase,
-whether or not with a fan,
-whether or not with a cap assembly,
-whether or not with a sun gear,
-whether or not with a speed and rotational direction encoder,
-whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,
-whether or not with a mounting flange
for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture8501310063Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:
- a specified speed of not more than 6000rpm,
- a minimum output of 400W, but not more than 1,3kW (at 12 V), or with a minimum output of 750W but not more than 1,55kW (at 36 V),
- a flange diameter of 85mm or more but not more than 200mm,
- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,
- a housing length of not more than 265mm, measured from the flange to the outer ending,
- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
- a stator with single T-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and
- surface magnets,
- whether or not with electronic power steering controller,
- whether or not with pulley or coupling,
- whether or not with rotor position sensor8501310068Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:
-a length of 110 mm or more but not more than 140 mm,
-a width of 90 mm or more but not more than 130 mm,
-a height of 80 mm or more but not more than 110 mm
for use in the manufacture of engines of motor vehicles8501310085Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:
- a DC motor of an output not exceeding 600 W,
- for usage with a supply voltage of 8 V or more but no more than 48 V,
- with motor connection (plug-in connection),
- whether or not with position sensor,
- whether or not with integrated control and power electronics,
- whether or not with spring mechanism for resetting the lever,
- built in a housing with reduction gear and lever attached to the motor drive shaft, or
- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod8501310099Other