EU tariff 81089030 Bars, rods, profiles and wire
Import duty 7% · 2 border controls
EU import result
81089030Bars, rods, profiles and wireImport duty7%of customs value · Regulation 2658/874 conditional charges may also apply · see Reporting & relief
Border controls2see Border controls
€7.00estimated duty · 7% of value
Rate 7% · TARIC:
7.000 %Border controls
Import check
- A general checkpoint. Customs wants a document before the goods are released, and the code's other footnotes say which one.
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 1C202b from the dual use list.
Waste shipment
Conditional: applies only in the cases the measure text sets out
- Applies if what you ship counts as waste. Waste needs prior notice and consent before it can move.
- The wastes mentioned in Article 3 (1) of Regulation (EC) No 1013/2006 shall be subject to the procedure of prior written notification and consent.
- The wastes mentioned in Article 4 (paragraphs 1 and 2) of Regulation (EU) 2024/1157 shall be subject to the procedure of prior written notification and consent.
- The wastes mentioned in Article 3 (2) of Regulation (EC) No 1013/2006 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the amount of waste shipped exceeds 20 kg
- The wastes mentioned in Article 3(paragraph 4) of Regulation (EU) 2024/1157 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the amount of waste shipped exceeds 20kg.
- The wastes mentioned in Article 4(paragraph 4) of Regulation (EU) 2024/1157 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the amount of waste shipped exceeds 20 kg.
- If the wastes listed in Annex III (green list) display certain hazardous characteristics, the relevant provisions shall apply as if these wastes had been listed in Annex IV (amber list). See Article 3 (3) of Regulation (EC) No 1013/2006.
- If the wastes listed in Annex III (green list) display certain hazardous characteristics, the relevant provisions shall apply as if these wastes had been listed in Annex IV (amber list). Article 4 (paragraph 2 letter e) of Regulation (EU) 2024/1157.
- The waste explicitly destined for laboratory analysis (Article 3 (4) of Regulation (EC) No 1013/2006) to assess either its physical or chemical characteristics or to determine its suitability for recovery or disposal operations shall not be subject to the procedure of prior written notification and consent. Instead, the procedural requirements of general information requirements shall apply (Article 18 of Regulation (EC) No 1013/2006). The amount of such waste exempted when explicitly destined for laboratory analysis shall be determined by the minimum quantity reasonably needed to adequately perform the analysis in each particular case, and shall not exceed 25|kg.
- Чрез дерогация от член 4, параграфи 1 и 2, превозите на отпадъци, изрично предназначени за лабораторен анализ или за изпитвания на експериментално третиране за оценка на физичните или химичните свойства на отпадъците или за определяне на тяхната пригодност за оползотворяване или обез вреждане, са предмет на общите изисквания за информация, определени в член 18, в случай че са изпълнени всички долупо сочени условия: а) количеството отпадъци не надвишава разумно необходимото количество за извършване на анализите или изпитванията във всеки конкретен случай, но не повече от 250kg или всяко по голямо количество, договорено за всеки отделен случай от компетентните органи по изпращането и по местоназначението и от лицето, което урежда превоза; б) в случай че лицето, което урежда превоза, поиска количество, по-голямо от 250kg, това лице следва да предостави доколкото е възможно информацията по приложение VII на компетентните органи по изпращането и по местоназначението, заедно с моти в
- By way of derogation from Article 4(1) and (2), shipments of waste explicitly destined for laboratory analysis or experimental treatment trials to assess either the physical or chemical characteristics of the waste or to determine its suitability for recovery or disposal shall be subject to the general information requirements laid down in Article 18 where all of the following conditions are fulfilled: (a) the quantity of waste does not exceed the quantity reasonably needed to perform the analysis or trial in each particular case, but not more than 250kg or any larger quantity agreed on a case-by- case basis by the competent authorities of dispatch and destination and the person who arranges the shipment; (b) in the event a quantity higher than 250kg is requested by the person who arranges the shipment, that person shall provide the information contained in Annex VII, to the extent possible, to the competent authorities of dispatch and destination together with the reasoned expla
- By way of derogation from Article 4(1) and (2), shipments of waste explicitly destined for laboratory aalysis or experimental treatment trials to assess either the physical or chemical characteristics of the waste or to determine its suitability for recovery or disposal shall be subject to the general information requirements laid down in Article 18 where all of the following conditions are fulfilled: (a) the quantity of waste does not exceed the quantity reasonably needed to perform the analysis or trial in each particular case, but not more than 250 kg or any larger quantity agreed on a case-by- case basis by the competent authorities of dispatch and destination and the person who arranges the shipment; (b) in the event a quantity higher than 250 kg is requested by the person who arranges the shipment, that person shall provide the information contained in Annex VII, to the extent possible, to the competent authorities of dispatch and destination together with the reasoned expl
Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Supplementary unit
Reported per item- A quantity you report, such as the number of items (NAR). It's a declaration field, not a charge.
Declare weight or units
Conditional — depends on a certificate or price- A reporting rule. You declare the net weight or the unit count for this code.
- Declaration under this goods code is only allowed if the threshold values (net weight/supplementary unit) are respected. If not, check the respective figures and correct if necessary. Otherwise, another goods code should be declared.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Customs measure
Conditional — depends on a certificate or priceConditional: applies only in the cases the measure text sets out
- The wastes mentioned in Article 3 (1) of Regulation (EC) No 1013/2006 shall be subject to the procedure of prior written notification and consent.
- The wastes mentioned in Article 4 (paragraphs 1 and 2) of Regulation (EU) 2024/1157 shall be subject to the procedure of prior written notification and consent.
- The wastes mentioned in Article 3 (2) of Regulation (EC) No 1013/2006 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the amount of waste shipped exceeds 20 kg
- The wastes mentioned in Article 3(paragraph 4) of Regulation (EU) 2024/1157 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the amount of waste shipped exceeds 20kg.
- The wastes mentioned in Article 4(paragraph 4) of Regulation (EU) 2024/1157 shall be subjected to the general information requirements laid down in Article 18 of the same Regulation, if the amount of waste shipped exceeds 20 kg.
- If the wastes listed in Annex III (green list) display certain hazardous characteristics, the relevant provisions shall apply as if these wastes had been listed in Annex IV (amber list). See Article 3 (3) of Regulation (EC) No 1013/2006.
- If the wastes listed in Annex III (green list) display certain hazardous characteristics, the relevant provisions shall apply as if these wastes had been listed in Annex IV (amber list). Article 4 (paragraph 2 letter e) of Regulation (EU) 2024/1157.
- The waste explicitly destined for laboratory analysis (Article 3 (4) of Regulation (EC) No 1013/2006) to assess either its physical or chemical characteristics or to determine its suitability for recovery or disposal operations shall not be subject to the procedure of prior written notification and consent. Instead, the procedural requirements of general information requirements shall apply (Article 18 of Regulation (EC) No 1013/2006). The amount of such waste exempted when explicitly destined for laboratory analysis shall be determined by the minimum quantity reasonably needed to adequately perform the analysis in each particular case, and shall not exceed 25|kg.
- Чрез дерогация от член 4, параграфи 1 и 2, превозите на отпадъци, изрично предназначени за лабораторен анализ или за изпитвания на експериментално третиране за оценка на физичните или химичните свойства на отпадъците или за определяне на тяхната пригодност за оползотворяване или обез вреждане, са предмет на общите изисквания за информация, определени в член 18, в случай че са изпълнени всички долупо сочени условия: а) количеството отпадъци не надвишава разумно необходимото количество за извършване на анализите или изпитванията във всеки конкретен случай, но не повече от 250kg или всяко по голямо количество, договорено за всеки отделен случай от компетентните органи по изпращането и по местоназначението и от лицето, което урежда превоза; б) в случай че лицето, което урежда превоза, поиска количество, по-голямо от 250kg, това лице следва да предостави доколкото е възможно информацията по приложение VII на компетентните органи по изпращането и по местоназначението, заедно с моти в
- By way of derogation from Article 4(1) and (2), shipments of waste explicitly destined for laboratory analysis or experimental treatment trials to assess either the physical or chemical characteristics of the waste or to determine its suitability for recovery or disposal shall be subject to the general information requirements laid down in Article 18 where all of the following conditions are fulfilled: (a) the quantity of waste does not exceed the quantity reasonably needed to perform the analysis or trial in each particular case, but not more than 250kg or any larger quantity agreed on a case-by- case basis by the competent authorities of dispatch and destination and the person who arranges the shipment; (b) in the event a quantity higher than 250kg is requested by the person who arranges the shipment, that person shall provide the information contained in Annex VII, to the extent possible, to the competent authorities of dispatch and destination together with the reasoned expla
- By way of derogation from Article 4(1) and (2), shipments of waste explicitly destined for laboratory aalysis or experimental treatment trials to assess either the physical or chemical characteristics of the waste or to determine its suitability for recovery or disposal shall be subject to the general information requirements laid down in Article 18 where all of the following conditions are fulfilled: (a) the quantity of waste does not exceed the quantity reasonably needed to perform the analysis or trial in each particular case, but not more than 250 kg or any larger quantity agreed on a case-by- case basis by the competent authorities of dispatch and destination and the person who arranges the shipment; (b) in the event a quantity higher than 250 kg is requested by the person who arranges the shipment, that person shall provide the information contained in Annex VII, to the extent possible, to the competent authorities of dispatch and destination together with the reasoned expl
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 81089030
8108903010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650408108903015Rods and wire of an alloy of titanium with:
- a uniform solid cross-section in the form of a cylinder,
- with a diameter of 0,8 mm or more, but not more than 5 mm,
- an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,
- a silicon content by weight of 0,3 % or more, but not more than 0,6 %,
- a niobium content by weight of 0,1 or more, but not more than 0,3 %, and
- an iron content by weight of not more than 0,2 %8108903035Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm8108903045Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 49678108903055Wires of an alloy of titanium:
- with a niobium content by weight of 42% or more, but not more than 47%,
- with a diameter of 2,36 mm or more, but not more than 7,85 mm,
- in coils of 15 kg or more, but not more than 45 kg,
- complying with standard AMS 49828108903060Forged cylindrical bars of titanium with:
- a purity of 99,995 % by weight or more,
- a diameter of 140 mm or more but not more than 200 mm,
- a weight of 5 kg or more but not more than 300 kg8108903070Wire of an titanium alloy containing by weight:
- 22 % (± 1 %) of vanadium, and
- 4 % (± 0,5 %) of aluminium
or
- 15 % (± 1 %) of vanadium,
- 3 % (± 0,5 %) of chromium,
- 3 % (± 0,5 % of tin and
- 3 % (± 0,5 %) of aluminium8108903090Other