EU tariff 4016930030 Rectangular ethylene-propylene-diene rubber gasket, with:
-a length of 72 mm or more but not more than 825 mm,
-a width of 18 mm or more but not more than 155 mm,
-a peak temperature of 150°C or more but not more than 240°C,
-a permissible material outflow at the place of the mold split of not more than 0,3 mm
Import duty 2.5% · EUDR: check scope · 1 border control
EUDR · Regulation (EU) 2023/1115Partial scope
This code sits in EUDR Annex I with partial coverage. Many rubber products need a Due Diligence Statement before customs clearance, so confirm your exact product.
EU import result
4016930030Rectangular ethylene-propylene-diene rubber gasket, with:
-a length of 72 mm or more but not more than 825 mm,
-a width of 18 mm or more but not more than 155 mm,
-a peak temperature of 150°C or more but not more than 240°C,
-a permissible material outflow at the place of the mold split of not more than 0,3 mmImport duty2.5%of customs value · Regulation 1776/193 conditional charges may also apply · see Reporting & relief
Border controls1see Border controls
€2.50estimated duty · 2.5% of value
Rate 2.5% · TARIC:
2.500 %Border controls
Import check
- A general checkpoint. Customs wants a document before the goods are released, and the code's other footnotes say which one.
- If the goods declared are described in footnote "DU" linked to the measure a prior import authorisation must be presented for the import, purchase or transport from Iran of the goods and technology listed in Annex I, whether or not originating in Iran (R267/2012).
- Goods 1C210 from the dual use list.
Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- According to The Special Provisions of Section II (A) (3) of the Preliminary Provisions of the Combined Nomenclature the suspension of customs duties for goods for certain categories of ships, boats and other vessels and for drilling or production platforms shall be subject to conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods.
- 1. Customs duties shall be suspended in respect of goods intended for incorporation in the ships, boats or other vessels classified at the following CN codes 8901 10 10; 8901 20 10; 8901 30 10; 8901 90 10; 8902 00 10; 8903 91 10; 8903 92 10; 8904 00 10; 8904 00 91; 8905 10 10; 8905 90 10; 8906 10 00; 8906 90 10 for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for fitting to or equipping such ships, boats or other vessels. 2. Customs duties shall be suspended in respect of: (a) goods intended for incorporation in drilling or production platforms: (1) fixed, of subheading ex 8430 49, operating in or outside the territorial sea of Member States, or (2) floating or submersible, of subheading 8905 20, for the purposes of their construction, repair, maintenance or conversion, and in respect of goods intended for equipping the said platforms. (b) tubes, pipes, cables and their connection pieces, linking these drilling or production platforms to the mainland.
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.