EU tariff 38112100 Additives for lubricating oils
Import duty 5.3% · 1 border control
EU import result
38112100Additives for lubricating oilsImport duty5.3%of customs value · Regulation 2658/874 conditional charges may also apply · see Reporting & relief
Border controls1see Border controls
€5.30estimated duty · 5.3% of value
Rate 5.3% · TARIC:
5.300 %Border controls
Chemicals (REACH)
- The EU's chemical safety rules. Some hazardous substances are capped or banned. If your product holds one over the limit, it can't come in unless it meets the conditions.
- A substance for which Annex XVII contains a restriction shall not be imported unless it complies with the conditions of that restriction. This shall not apply to the manufacture, placing on the market or use of a substance in scientific research and development. Annex XVII shall specify if the restriction shall not apply to product and process orientated research and development, as well as the maximum quantity exempted. The restrictions shall not apply to the use of substances in cosmetic products, as defined by Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products (repealing the Directive 76/768/EEC), with regard to restrictions addressing the risks to human health within the scope of that regulation. (Article 67 points 1 and 2 of Regulation (EC) No 1907/2006).
- REACH - Annex XVII - Entry 9
Reporting and relief rows on this code
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The autonomous Common Customs Tariff duties laid down in Regulation (EEC) No 2658/87 for parts, components and other goods of a kind to be incorporated in or used for aircraft and parts thereof in the course of their manufacture, repair, maintenance, rebuilding, modification or conversion is suspended. In order to benefit from the suspension, the declarant shall present to the customs authorities an Authorised Release Certificate — EASA Form 1, as set out in Appendix I to Annex I to Regulation (EU) No 748/2012, or an equivalent certificate. The certificates which are deemed to be equivalent to Authorised Release Certificates are listed in Annex II to the Regulation (EU) 2018/1517.
Duty suspension
0%- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Duty suspension
0%Conditional: applies only in the cases the measure text sets out
- The normal duty is suspended to 0% for a specific use. If your goods qualify you pay nothing; if not, the normal duty applies. The condition says who qualifies.
- The relief from or reduction of customs duties shall be subject to the conditions laid down in the relevant provisions of the European Union with a view to customs control of the use of such goods (see Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (OJ L 269, 10. 10. 2013, p. 1)).
- However, the suspension is not allowed where the treatment is carried out by retail sale or catering undertakings.
- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Customs measure
€3.00Conditional: applies only in the cases the measure text sets out
- From 1 July 2026 until 1 July 2028, a customs duty of EUR 3 per item in a consignment the intrinsic value of which does not exceed a total of EUR 150 shall apply instead of the relief eliminated pursuant to Article 1 of this Regulation, where: (a) the importation of the goods is exempt from VAT in accordance with Article 143(1), point (ca), of Directive 2006/112/EC; or (b) the goods are in a postal consignment as defined in Article 1, point (24), of Delegated Regulation (EU) 2015/2446.
Customs measure
0%- The suspension of the autonomous Common Customs Tariff duties for the agricultural and industrial products, listed in the Annex of Regulation (EU) 2021/2278, does not apply to any mixtures, preparations or products made up of different components containing these products. Article 1 paragraph 2 of Regulation (EU) 2021/2278
Customs measure
0%Not applicable to this code
Country preference and anti-dumping
- Resolved per shipment in Bindu, once an origin and destination are set. GSP/FTA preferences and anti-dumping duties depend on the trading pair.
Country-group preferences
- Preference rates for country groups exist on this code, but the local TARIC data can't confirm whether your origin belongs to those groups, so they stay unresolved.
Out of scope
- Excise duties
- Which certificates your customs broker files
Selected from the EU TARIC snapshot 2026-07-06.
Declarable codes under 38112100
3811210010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils3811210011Dispersing agent and oxidation inhibitor containing :
- o-amino polyisobutylenephenol (CAS RN 78330-13-9),
- more than 30 % by weight but not more than 50 % by weight of mineral oils,
used in the manufacture of blends of additives for lubricating oils3811210012Dispersing agent containing :
- esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),
- 35 % or more but not more than 55 % by weight of mineral oils and
- with a chlorine content of not more than 0,05 % by weight,
used in the manufacture of blends of additives for lubricating oils3811210013Additives containing :
- borated magnesium (C16-C24) alkylbenzene sulphonates and
- mineral oils,
having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils3811210014Dispersing agent :
- containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),
- containing 35 % or more but not more than 55 % by weight of mineral oils,
- with a chlorine content by weight of not more than 0,05 %, - having a total base number of less than 15,
used in the manufacture of blends of additives for lubricating oils3811210016Detergent containing :
- Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)
- 40 % or more but not more than 60 % by weight of mineral oils and
- having a total base number more than 120
used in the manufacture of blends of additives for lubricating oils3811210019Additives containing:
- a polyisobutylene succinimide based mixture, and
- more than 30 % but not more than 50 % by weight of mineral oils,
having a total base number of more than 40, for use in the manufacture of lubricating oils3811210020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil3811210021Additive containing by weight:
-90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (CAS RN 160305-95-3),
-3 % or more but not more than 10 % of mineral oil,
for use in the manufacture of blends of additives for lubricating oils3811210022Additive consisting essentially of:
-Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8),
-25 % or more by weight, but not more than 40 % by weight of mineral oil,
used in the manufacture of blends of additives for lubricating oils3811210024Additive consisting essentially of:
-Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20,
-45 % and more by weight and no more than 55 % by weight of mineral oil,
used in the manufacture of blends of additives for lubricating oils3811210025Additives containing:
- a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000 but not more than 20,000, and
- more than 15 % , but not more than 30 % by weight of mineral oils,
for use in the manufacture of lubricating oils3811210026Additive consisting essentially of:
-Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8),
-7 % or more by weight but not more than 12 % by weight of mineral oil,
used in the manufacture of blends of additives for lubricating oils3811210027Additives containing:
-10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and
-mineral oils,
for use in the manufacture of lubricating oils3811210028Additive consisting essentially of:
-Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8);
-triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight,
-O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds
-10 % or more by weight but not more than 20 % by weight of mineral oils,
used in the manufacture of blends of additives for lubricating oils3811210029Additive containing by weight:
-25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),
-30 % or more but not more than 65 % of mineral oils,
for use in the manufacture of blends of additives for lubricating oils3811210030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process3811210032Additive consisting essentially of:
-Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2),
-4 % or more by weight but not more than 12 % by weight of mineral oil,
used in the manufacture of blends of additives for lubricating oils3811210033Additives containing:
- calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and
- mineral oils,
having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils3811210034Detergent containing:
-benzenesulfonic acid, methyl-, mono-C20-24-branched alkyl derivs., calcium salts (CAS RN 722503-68-6),
-more than 30 % but not more than 60 % by weight of mineral oils, and,
-having a total base number of more than 310 but not more than 340,
used in the manufacture of blends of additives for lubricating oils3811210037Additives containing:
- a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and
- more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils3811210038Solution of mineral oils (CAS RN 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight:<br> <br>-25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (CAS RN 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3)<br> <br>-whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of C3-C24 carboxylic acids (CAS RN 68990-37-4)<br>3811210048Additives containing:
- overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and
- by weight more than 25% but not more than 50% of mineral oils,
- having a total base number of more than 350, but not more than 450,
for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils3811210053Additives containing: - overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and
- by weight more than 40 % but not more than 60 % of mineral oil,
having a total base number of 280 or more but not more than 420,for use in the manufacture of lubricating oils3811210055Additives containing:
- low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and
- by weight more than 40 % but not more than 60 % mineral oils,
having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils3811210060Additives for lubricating oils, containing mineral oils,
- based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,
- with a total base number (TBN) of 280 or more but not more than 320,
used as a concentrated additive for the manufacture of engine oils through a blending process3811210063Additives containing:
- an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and
- by weight more than 40 % but not more than 60 % of mineral oils,
having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils3811210065Additives containing:
- a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and
- more than 35 % but not more than 50 % by weight of mineral oils,
having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils3811210070Additives for lubricating oils,
- containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),
- containing mineral oils,
- with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,
- with a total base number (TBN) of more than 20,
used as a concentrated additive for the manufacture of engine oils through a blending process3811210073Additives containing:
- borated succinimide compounds (CAS RN 134758-95-5),
- mineral oils, and
- having a total base number (TBN) greater than 40,
for use in the manufacture of additive mixtures for lubricating oils3811210075Additives containing:
- Calcium (C10-C14) dialkylbenzenesulfonates,
- more than 40 %, but not more than 60 % by weight of mineral oils,
with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils3811210077Antifoam additives consisting of:
- a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and
- more than 50 % but not more than 80 % by weight of mineral oils
for use in the manufacture of additive blends for lubricating oils3811210080Additives containing :
- polyisobutylene aromatic polyamine succinimide,
- more than 40 % but not more than 60 % by weight of mineral oils,
with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils3811210083Additives containing:
- polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),
- containing more than 31,9 % but not more than 43,3 % by weight of mineral oils,
- not more than 0,05 % by weight chlorine, and
- having a total base number (TBN) greater than 20,
for use in the manufacture of additives blends for lubricating oils3811210085Additives,
- containing more than 20 % but not more than 45 % by weight of mineral oils,
- based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,
for use in the manufacture of blends of additives3811210090Other